
Standard Tanks and Moulded Tanks
Standard tanks for Fuel, Water and Waste
The standard tanks come in a
range of different dimensions which are listed, with prices in the
Catalogue
section. The connections are made through
the hatch. Hatches and fittings need to be specified and bought separately
according to the type of tank.
The standard fuel tanks come complete with a hatch which includes, as a minimum,
a filler hole, outlet hole with dip tube, and ventilation hole.
The standard water tank
comes with an inspection cover without holes or connections. A hatch needs
to be bought separately.
The standard holding tanks come with a hatch with a filler hole, outlet hole
with dip tube, ventilation hole and flush hole. Elbow or straight hosetails and
blanks need to be bought separately.
Moulded tanks
Please talk to us about your requirements, we can produce regular or
irregular shaped tanks in polyethylene to your exact specifications, in
quantity. This is an interesting option for boat or vehicle manufacturers
where multiple tanks in polyethylene are required.
Standard Fuel Tanks
CE marked fuel tanks suitable for petrol and diesel. Manufactured from
High Density Polyethylene. These tanks are red in colour and come
complete with inspection hatch, filler cap with vent and an 10mm fitting
with pickup pipe for fuel feed. A fuel return may also be fitted. If you
prefer there is a separate vent fitting located next to the feed. This
is a 1/2" hose tail.
We can change the size of the fittings if required, you just need to
let us know the size of fitting and the type of hose you will be
connecting to. If you give us this information at the time or ordering
we can change the fitting(s) accordingly.
There is also provision to fit an electrical sender unit
suitable for use with gauge IPFR
(See
accessories page). A mechanical
gauge is also available
If you are filling from a deck filler you will need to purchase one
of our brass 1 1/2" elbow or straight hosetails
(See accessories page).
Capacities and various
regular shapes available from 33 litres to 140 litres |

The tank comes complete with Inspection hatch including filler, vent, dip pipe and fitting to take
a mechanical or electrical sender


 |
|
Standard Water Tanks
Water tanks suitable for drinking water.
Manufactured from High Density
Polyethylene. These tanks are green in colour and come with an
inspection cover. A hatch, bought separately,
provides all the fittings necessary for water filling, venting and
extraction.
Capacities and various regular shapes
available from 32 to 107 litres
|

The tank comes with an inspection cover. A hatch including filler,
vent, dip pipe (and fitting to take a mechanical or electrical sender)
needs to be bought separately

|
|
Standard Waste / Holding Tanks
Waste water tanks suitable for holding tanks or for grey water (washing
waster or shower water)
Manufactured from High Density Polyethylene. These tanks are yellow in
colour and come complete with an inspection cover which includes a 38mm
dip tube and threaded male 1 1/2" BSP holes for inlet, outlet. A
threaded 1" BSP female hole for vent. A threaded 3/8" BSP female hole
for flush.
Hosetails and blanks need to be bought separately.
Inlet and Outlet hosetail is 1
1/2" BSP x 38mm and can be straight or elbow
Vent is 1" BSP x 25mm straight
or elbow and needs a 1" BSP nipple.
Flush is a 3/8" BSP x 12mm
straight only or can be blanked off
Capacities and various regular shapes
available from 28 to 103 litres |
 |
Please
see the
Catalogue for prices
|