BoatWide Catalogue

HomeSite MapTerms & CondsSearchUp a Level

 
 

Products




Float Level Sensors for Black Water. Threaded 1 1/4" BSP. Stainless 316

BoatWide Catalogue | Tank Accessories | Senders and Gauges, level monitors | Level Senders and Gauges WEMA/KUS | Level Float Sender |  Float Level Sensors for Black Water. Threaded 1 1/4" BSP. Stainless 316

More Information

More Information

Threaded 1 1/4" BSP

Stainless 316

Strainer tube for black water

240 - 33 ohms (Empty to Full)
Compatible with IP indicator

2 "o" Nitrile seals

Adapter is available (the first product in the list) to change the resistances to adapt sensor with any gauge i.e if you cannot find a replacement sensor with resistance and same length then you can buy a sensor and use the adaptor so it works with the original gauge

Resistance change Adaptor for level sensors  



Price: €32,00 (€38,72 IVA including 21%)

This adaptor will change the resistances from 0-180 ohms at 240-33 Ohms or vice versa

For example if you have a level sensor 0 ohm (empty) up to 180 ohm (full) and for whatever reason you have 270 ohm (empty) clock up to 33 ohm (full) you can connect this box between the sensor and the gauge and working properly as you have 0-180 gauge and watch 0-180, or vice versa as you have 240-33 ohm gauge sending unit and 240-33 ohm gauge

Also, the box stabilises the sensitivity of the level sensors avoiding any false readings from boat movment

SHS-E100mm Level Sensor  



Price: €66,00 (€79,86 IVA including 21%)

SHS-E205mm Level Sensor  



Price: €75,00 (€90,75 IVA including 21%)

SHS-E305mm Level Sensor  



Price: €80,00 (€96,80 IVA including 21%)

SHS-E410mm Level Sensor  



Price: €86,00 (€104,06 IVA including 21%)

SHS-E510mm Level Sensor  



Price: €103,00 (€124,63 IVA including 21%)

SHS-E760mm Level Sensor  



Price: €156,00 (€188,76 IVA including 21%)

Flange 1,25

Flange 1,25" BSP with 6 holes for level sensors with 1,25" thread



Price: €12,00 (€14,52 IVA including 21%)

Including stainless screws and nitrile seal.