Standard Waste / Holding Tanks

For irregular shapes or if greater capacity tanks are required then a custom made tank is an ideal solution

Comes complete with an inspection cover which includes two threaded male 1 1/2" BSP holes for inlet and outlet.  Outlet includes a 38mm dip tube.  There is a  threaded 1" BSP female hole for vent and a  threaded 3/8" BSP female hole for flush. 

Hosetails and blanks need to be bought separately. 

Inlet and Outlet hosetail is 1 1/2" BSP x 38mm and can be straight or elbow
Vent is 1" BSP x 25mm straight or elbow and needs a 1" BSP nipple.
Flush is a 3/8" BSP x 12mm straight only or can be blanked off
(See fittings page)

Standard tank fax quotation form

Dimensions in mm, Length x Width x Height of tank (Not including the connections)