Standard Fuel Tanks

For irregular shapes or if greater capacity tanks are required then a custom made tank is an ideal solution

CE marked fuel tanks suitable for petrol and diesel. Manufactured from High Density Polyethylene. These tanks are red in colour and come complete with inspection cover, filler cap with vent and an 10mm fitting with pickup pipe for fuel feed. A fuel return may also be fitted. If you prefer there is a separate vent fitting located next to the feed. This is a 5/8" (16mm) hose tail.

We can change the size of the fittings if required, you just need to let us know the size of fitting and the type of hose you will be connecting to. If you give us this information at the time or ordering we can change the fitting(s) accordingly.

There is also provision to fit an electrical sender unit  suitable for use with gauge IPFR (Listed on the fittings page)

If you are filling from a deck filler you will need to purchase one of our 1 1/2" elbow or straight hosetails (Listed on the fittings page)

Standard tank fax quotation form 
Dimensions in mm, Length x Width x Height of tank (Not including the connections)